Cart (empty)
Your cart is empty
1059 McDonald Avenue (corner of Foster Avenue), Brooklyn, New York 11230   |   Call 718-633-4300
MENU

Specialty Tools

  • 1-1/8-Inch Hex 20-Inch Hammer Bull Point
    1-1/8-Inch Hex 20-Inch Hammer Bull Point
    The Hitachi 985230 1-1/8-Inch Hex 20-Inch Demolition Bull Point Hammer Chisel is for use with demolition hammers, rotary drill hammers and combination drills to work in concrete, masonry and natural stone. The chisel has optimized Cutting edge geometry for best removal rate. Features fully hardened material for re-sharpening and re-forging and a high quality, high carbon hardened steel for a long lifetime. The high homogenous steel structure gives perfect balance between wear resistance and toughness for optimal working results. The hammer chisel features a head hardness of 52 to 57-HRC allows the bit to achieve wear resistance up to 50 Joules. Optimized heat treatment (hardening and tempering) ensures best quality for the finished steel. High tolerance milled shank suitable for continuous heavy-duty usage and ensures perfect fit with the tool. CNC (computer numerical control) controlled manufacturing ensures 100-percent quality consistency. The hammer chisel measures 20-inches in length. Mfg Item #: 985230 The Hitachi 985230 1-1/8-Inch Hex 20-Inch Demolition Bull Point Hammer Chisel is...
  • 1-1/8-Inch Hex 5-1/2-Inch by 20-Inch Hammer Clay Spade
    1-1/8-Inch Hex 5-1/2-Inch by 20-Inch Hammer Clay Spade
    5-1/2-Inch Clay spade 1 1/8-Inch Hex Shank 20-Inch long The Hitachi 985233 1-1/8-Inch Hex 5-1/2-inch by 20-Inch Demolition Hammer Clay Spade is for use with demolition hammers, rotary drill hammers and combination drills to work in concrete, masonry and natural stone. The spade has optimized Cutting edge geometry for best removal rate. Features fully hardened material for re-sharpening and re-forging and a high quality, high carbon hardened steel for a long lifetime. The high homogenous steel structure gives perfect balance between wear resistance and toughness for optimal working results. The clay spade features a head hardness of 52 to 57-HRC allows the bit to achieve wear resistance up to 50 Joules. Optimized heat treatment (hardening and tempering) ensures best quality for the finished steel. High tolerance milled shank suitable for continuous heavy-duty usage and ensures perfect fit with the tool. CNC (computer numerical control) controlled manufacturing ensures 100-percent quality consistency. The clay spade measures 5-1/2-inches in width by and 20-inches in length. Mfg Item #: 985233 5-1/2-Inch Clay spade 1 1/8-Inch Hex Shank 20-Inch long The Hitachi 985233 1-1/8...
  • 5-1/2 in Funnel
    5-1/2 in Funnel
    5-1/2 in Funnel, Blue Plastic 5-1/2 in Funnel, Blue Plastic...
  • 7.2 in Funnel
    7.2 in Funnel
    7.2 in Funnel, Red Plastic 7.2 in Funnel, Red Plastic...
  • Demolition Hammer 1-1/8 in HEX
    Demolition Hammer 1-1/8 in HEX
    Anti-vibration handle reduces arm fatigue Two way tool retainer accepts three types of 1-1/8 in hex shank bits Sealed grease system requires no warm-up Idle hammering prevention increases tool life and minimizes maintenance A full-load impact rate of 850 BPM at 55 J per stroke results in superior demolition efficiency Amps: 15 Impact Energy: 40.6 ft-lbs Striker Weight : 4.8 lbs BPM : 850 Shank Type: 1-1/8 in HEX Weight :70.4 lbs Mfg Item #: H90SE Anti-vibration handle reduces arm fatigue Two way tool retainer accepts three ty...